Acronis Universal Restore Installation; Extracting Acronis True Image Server; Running Acronis True Image Server; Removing Acronis True Image Server - ACRONIS TRUE IMAGE 9.1 - SERVER FOR WINDOWS User Manual

2.1.1 Acronis Universal Restore installation

Acronis Universal Restore is an option to Acronis True Image Server. It is purchased
separately and installed from a separate setup file. Acronis Universal Restore has its own
serial number which is required at installation.
Acronis Universal Restore can only be installed on a computer where at least one of the
following Acronis components is installed:
Acronis True Image Server
Bootable Media Builder.
Acronis Universal Restore can be installed on a networked computer either locally, by
running the setup program, or remotely using one of remote installation services, for
example, Systems Management Server (a component of Microsoft Windows NT BackOffice
program package).
After installation, Acronis Universal Restore automatically plugs in one or more of above
program components. Acronis True Image Server name, displayed in its main window,
changes to Acronis True Image Server with Universal Restore.

2.2 Extracting Acronis True Image Server

When installing Acronis True Image Server, you can save the setup (.msi) file on a local or
network drive. This will help when modifying or recovering the existing component
installation.
To save a setup file:
• run the Acronis True Image Server setup file;
• in the Install Menu, right-click on the program name and select Extract;
• select a location for the setup file and click Save.

2.3 Running Acronis True Image Server

You can run Acronis True Image Server in Windows by selecting Start -> Programs ->
Acronis -> Acronis True Image Server -> Acronis True Image Server or clicking on
the appropriate shortcut on the desktop.
If your operating system does not load for some reason, you can run Acronis Startup
Recovery Manager. However, this must be activated prior to use; see
Recovery Manager
to learn more about this procedure. To run the program, press F11 during
server bootup, when you see a corresponding message that tells you to press that key.
Acronis True Image Server will be run in the standalone mode, allowing you to recover the
damaged partitions.
If your disk data is totally corrupted and you cannot boot (or if you have not activated
Acronis Startup Recovery Manager), load the standalone Acronis True Image Server version
from the bootable media (supplied with the retail box or created by you using Rescue Media
Builder) or RIS-server. Then you will be able to restore the disk from its previously created
image.

2.4 Removing Acronis True Image Server

Select Control panel -> Add or remove programs -> <Acronis True Image Server>
-> Remove. Then follow instructions on the screen. You may have to reboot your computer
afterwards to complete the task.
Copyright © Acronis, Inc., 2000-2007
3.4 Acronis Startup
13