ACRONIS TRUE IMAGE 9.1 - SERVER FOR WINDOWS User Manual page 88

/raw
/progress:[on | off]
filebackup
/include:[names]
/exclude_names:[names]
/exclude_masks:[masks]
/exclude_system
/exclude_hidden
deploy
/file_partition:[partition
letter]
/harddisk:[disk number]
/partition:[partition
number]
/target_harddisk:[disk
number]
/target_partition:[partiti
on number]
/start:[start sector]
/size:[partition size in
sectors]
/fat16_32
88
Use this option to create an image of a disk (partition) with
unrecognized or unsupported file system. This will copy all
disk/partition contents sector-by-sector. Without this option only the
sectors containing useful system and user data are imaged.
Shows/hides the progress information (percent completed). It is
shown by default.
Files and folders to be included in the backup (semicolon
separated). For example:
/include:E:\Workarea\MyProject
Files and folders to be excluded from the backup (semicolon
separated). For example:
/exclude_names:E:\Workarea\MyProject\111.doc;E:\W
orkarea\MyProject\Old
Applies masks to select files to be excluded from the backup. Use
the common Windows masking rules. For example, to exclude all
files with extension .exe, add *.exe mask. My???.exe mask will
reject all .exe files with names consisting of five symbols and
starting with "my".
/exclude_masks:*.txt;111.*
Excludes all system files from the backup.
Excludes all hidden files from the backup.
Specifies the partition where the image file is stored (by letter or
number). This option is used with /filename:file_name. In this case
the file name must be specified without drive letter or root folder.
For example:
/file_partition:D /filename:"\1.tib"
Specifies the hard disks to restore by numbers.
Specifies the partitions to restore by numbers.
Specifies the hard disk number where the image will be restored.
Specifies the target partition number for restoring a partition over
the existing one. If the option is not specified, the program assumes
that the target partition number is the same as the partition number
specified with the
/partition
Sets the start sector for restoring a partition to the hard disk
unallocated space.
Sets the new partition size (in sectors).
Enables the file system conversion from FAT16 to FAT32 if the
partition size after recovery is likely to exceed 2GB. Without this
option, the recovered partition will inherit the file system from the
image.
option.
Copyright © Acronis, Inc., 2000-2007