Sonos ZONEPLAYER 120 Setup Manual page 11

Sonos ZonePlayer 120 Setup Guide
Note: Firewall software such as Norton Internet Security™, McAfee® Personal
Firewall, Windows Firewall, or Mac OS X Firewall, can block the operation of your
Sonos Desktop Controller software. During installation, you may see prompts from
your firewall software indicating that the Sonos application is attempting to
perform certain operations. You should always allow full access to the Sonos
application. You may also need to change the settings of your firewall software to
ensure that Windows file sharing is not blocked. Please go to our Web site at
http://faq.sonos.com/firewall for detailed instructions.
4
Add the Sonos Controller
• After at least one ZonePlayer has been set up, you can pick up your Controller and follow
the prompts on the Controller's screen to add it to your music system.
• You should charge your Sonos Controller when you remove it from the packaging. The
Controller battery will be fully charged in about two (2) hours. You can use your
Controller while it is charging.
• The power connector cover is part of your Controller's splash-resistant design, so keep
the cover down when the Controller is not charging.
Power
connector cover
AC power adapter
AC power
adapter inlet
7
Power cable