Start - Dell PowerVault NX3600 Command Line Interface Manual

start

Description
This command starts the diagnostic tool that you want to start.
Syntax
diag start name [options]
where the arguments are:
name
the options are:
[-timeout timeout]
[-action params]
[-protocol params]
[-share_name params]
[-export_name params]
88
- Diagnostic name (refer to list
command,
in order to view the available
diagnostics)
the options are:
Possible diagnostics with relevant
parameters:
GeneralSystemDiagnostic
FileSystemDiagnostic
ProtocolsDiagnostic -action logs
(default)
ProtocolsDiagnostic -action client -
protocol
cifs|nfs -client_host xxx.xxx.xxx.xxx
ProtocolsDiagnostic -action file -
protocol
cifs|nfs -client_host xxx.xxx.xxx.xxx
-share_name SHARE | -export_name /
NAS_VOLUME/DIRECTORY
-file_path /PATH/RELATIVE/TO/SHARE/OR/
EXPORT
NetworkDiagnostic [-client_host
xxx.xxx.xxx.xxx]
PerformanceDiagnostic
NAS_VOLUME
- Diagnostic timeout (seconds)
- Diagnostic parameter
- Diagnostic parameter
- Diagnostic parameter
- Diagnostic parameter
-nas_vol_name