Actions - Dell PowerVault NX3600 Command Line Interface Manual

Fc-set
NOTE: This command is not applicable to the Dell PowerVault NX3600/NX3610.
Description
This command auto-updates the current Fibre Channel configuration (i.e. in case the FC card was replaced)
Syntax
system maintenance luns configuration Fc-set
iscsi-set
Description
This command allows you to change the iSCSI discovery IP address, username, and passwords.
Syntax
system maintenance luns configuration iscsi-set [options]
where options are:
[-iSCSIDiscoveryIPs
UserName
Password

actions

The menu under actions is progress.
The commands available under actions are:
• set-journaling
• stop
• set-mirroring
• status
• start
progress
The command under progress is view.
view
Description
This command displays the progress of system start and system stop sequences.
Syntax
system maintenance actions progress view sequence
Where the argument is:
sequence
iSCSIDiscoveryIPs] The IP(s) of ISCSI server(s),
separated by commas
The user name of ISCSI server ("None"
if the user is not required)
The password of ISCSI server ("None"
if the user is not required)
System_stop/system_start
45