Static-Routes - Dell PowerVault NX3600 Command Line Interface Manual

mtu
list
Description
This command displays all the networks available on the NAS cluster.
Syntax
system networking network-configuration list

static-routes

The commands available under static-routes are:
• add
• delete
• list
add
Description
This command adds static network routes to the NAS cluster.
Syntax
system networking static-routes add destination gateway network [options]
Where the arguments are:
destination
gateway
network
The options are:
[-netmask netmask]
[-force/-noforce]
delete
Description
This command deletes the specified static route.
Syntax
system networking static-routes delete index(es)
Where the argument is:
index(es)
60
MTU (Maximum Transmission Unit)
destination network/host
route packets via this gateway
network to be used: Primary
netmask to be used, default is
255.255.255.255
force static route add, even if the
gateway
is not responding
Comma separated list of static routes
indexes to be deleted