This command displays the configuration restore sources and modules for the specified NAS volume.
Syntax
system maintenance backup-configuration view-volume-options target_conf
Where the argument is:
target_conf
protocols
The menu available under protocols is cifs.
cifs
The menu under cifs is configuration.
restart
Description
This command restarts the CIFS service on the NAS cluster.
Syntax
system protocols cifs restart
configuration
The commands available under configuration are:
•
view
•
set
view
Description
This command displays the CIFS configuration for the NAS cluster. The authentication mode, UNIX charset, DOS
charset, and status of the CIFS configuration is displayed.
Syntax
system protocols cifs configuration view
set
Description
This command allows you to change certain parameters of the current CIFS configuration. You can change the status,
security mode, and the UNIX and DOS charsets for the CIFS configuration.
Syntax
system protocols cifs configuration set [options]
Where the options are:
48
NAS volume for which configuration
options will be shown