Display Profiles; Adjusting The Display Brightness - Fujitsu ST6012 - Stylistic Tablet PC User Manual

• Go down. Use [Z] key.
• Close. Use [Esc] key.

Display Profiles

The Fujitsu Tablet Controls utility allows you to set different display configurations when the system is
undocked, docked in portrait mode, and docked in landscape mode. When the tablet transitions between
these three configurations, the selected configuration will automatically be applied.
Setting Display Profiles
To change display configurations, perform the following steps:
1
Go to Start > Control Panel.
2
Open "Intel® GMA Driver for Mobile".
3
Modify the settings to your desired configuration. You will be able to change the Display mode and Display
Settings for all available monitors.
4
Once the desired configuration is applied, go to the Control Panel and open "Fujitsu Tablet Controls".
5
On the "Fujitsu Tablet Controls" click "Save Current Profile".
Repeat the above steps for all three modes of the slate:
a) when the system is docked in landscape mode,
b) when the system is docked in portrait mode, and,
c) when the system is undocked.

Adjusting the Display Brightness

There are four ways to adjust your display's brightness:
D
EPENDING UPON WHETHER YOU ARE RUNNING YOUR SYSTEM ON BATTERY OR
DEFAULT SCREEN BRIGHTNESS SETTINGS WILL BE DIFFERENT
RUNNING ON BATTERY IS LOWER THAN THAT ON
57 - Productivity Applications and Utilities
. T
HE SCREEN BRIGHTNESS DEFAULT FOR
AC
POWER IN ORDER TO OPTIMIZE BATTERY LIFE
AC ,
POWER THE
.