Telephone Base And Charger Installation - VTech CS6129-54 - V-Tech DECT 6.0 Five Handset Cordless User Manual

Getting started

Telephone base and charger installation

Install the telephone base and charger(s) as shown below.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service
through your telephone line, you must install a DSL filter between the
telephone line cord and the telephone wall jack. The filter prevents noise and
caller ID problems caused by DSL interference. Contact your DSL service
provider for more information about DSL filters.
Telephone
wall jack
If you have DSL
high speed Internet
service, a DSL
filter (not included)
is required.
Telephone line cord
Use only the power adapters supplied with this product. To order a
replacement, visit our website at www.vtechphones.com or call 1 (800) 595-
9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.
The power adapters are intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling or an under-the-table/cabinet outlet.
Telephone
base power
adapter
Telephone base
2
Charger adapter
Electrical outlet
not controlled by
a wall switch
Charger