Key installation steps
Step 1
Step 3
Step 4
and
nl
Step 5
Step 6
Step 7
Step 8
Step 9
Step 1 1
Step 12
Set up the rack.
Install P700m controller on each server blade.
Install BladeSystem c-Class enclosure and its servers, interconnect devices, and other
components. Install operating system updates and patches, and, if necessary, update
firmware.
For each server that will boot locally (not use the storage enclosure as a boot device),
install the operating system.
Install MDS600 storage enclosures. If necessary, update the firmware.
Install MSA2000sa controller enclosures and MSA drive enclosures. If necessary, update
the firmware.
Configure zoning on the switch.
Configure the MDS600 and storage.
Configure the MSA2000sa controllers and storage.
Key installation steps
59