Typical Network Configuration (One Ethernet Connection) - McDATA StorageWorks 64 - SAN Director Switch Planning Manual

Physical Planning Considerations
5
McDATA Products in a SAN Environment - Planning Manual
5-12
• Part of the dedicated 10/100 megabit per second (Mbps) LAN
segment that provides access to managed products. This Ethernet
connection is part of the equipment cabinet installation and is
required. Connection of remote workstations through the hub is
optional. This type of network configuration using one Ethernet
connection through the management server is shown in
Figure 5-2. Intrepid 6064 Directors are used as an example.
Figure 5-2

Typical Network Configuration (One Ethernet Connection)

• Part of a second management server interface that connects to a
customer intranet and allows operation of the Element Manager
application from remote user PCs or workstations. The customer
intranet can be a ten or 100 Mbps LAN segment. Connection to
this LAN segment is optional and depends on customer
requirements. This type of network configuration using both
Ethernet connections is shown in
Directors are used as an example.
Figure 5-3. Intrepid 6064