Table of Contents
Advertisement
Planning Considerations for Fibre Channel Topologies
3
Management
McDATA Products in a SAN Environment - Planning Manual
3-44
Figure 3-18
Intrepid 6140 Director ports accessed from the rear.
143
8F
93
135
87
8B
Intrepid 6140 Port Numbers and Logical Port Addresses (Rear)
Figure 3-18
The figure shows:
•
SBAR positions (0 and 1).
•
UPM card numbers (numerical 32, 33, and 34).
•
Numerical physical port numbers in blue (132 through 143). Port
numbers 128 through 131 are embedded and not addressable.
•
Hexadecimal physical port numbers in red (84 through 8F).
Port numbers 80 through 83 are embedded and not addressable.
•
Logical port addresses in bold (hexadecimal 88 through 93).
Port addresses 84 through 87 are not addressable.
Although
the Intrepid 6140 Director, physical port numbers and logical port
addresses can be extrapolated for the Intrepid 6064 Director
(64 ports), Sphereon 3232 Fabric Switch (32 ports), Sphereon 4300
Fabric Switch (12 ports), and Sphereon 4500 Fabric Switch (24 ports).
The following considerations must be given to the limitations and
Limitations
interactions of director or fabric switch management when using
open systems (FCP) or FICON management style:
illustrates port numbering and logical port addressing for
UPM Cards
34
142
141
140
8E
8D
8C
92
91
90
32
134
133
132
85
84
86
89
88
8A
SBAR - 1 Module
SBAR - 0 Module
Figure 3-17
and
Figure 3-18
UPM Cards
33
136
137
138
88
89
8A
8C
8D
8E
depict UPM card maps only for
139
8B
8F
Advertisement
Table of Contents
