Table of Contents
Advertisement
ST2-XM OPERATION
SRC2 REMOTE CONTROL WITH RNET CONTROLLER
SRC2 Remote Control Operation
Turning the unit on
The tuner is power managed by the CAV6.6 or other
RNET-enabled controller. If the tuner is in standby
mode, any button press of the SRC2 will bring the
tuner out of standby mode when used with the UNO
keypad.
Selecting the desired tuner
To select a tuner, push
name/number associated with Tuner 1 (XM) or Tuner
2 (AM/FM), or use the numeric source inputs at the
bottom of the SRC2.
Selecting the desired band (AM/FM only)
Push
to toggle between AM/FM reception.
Selecting a Mode (XM)
Push
or
,
ating modes.
Exiting a Mode (XM)
Press
to exit XM operating mode menu.
Signal Strength Mode (XM)
Press and hold
and release. The display shows
the signal strength rating. To exit press
Selecting the desired frequency or channel
Use the Channel
for manual tuning. To move quickly through the
channels, press and hold the button for more than
1.5 seconds. To directly select a station or channel,
enter the three- or four-digit channel or frequency
24
and choose the source
to toggle between XM oper-
.
and
or
and
(1071 for 107.1, etc.). European regions use five-
digit station frequencies.
Frequency Seek (AM/FM only)
The SEEK function is performed by pressing and
releasing the Select
higher frequency station press
lower frequencies. Tuning begins at the current fre-
quency, seeks upward (or downward) and stops at the
next tuned station. Pushing
tinues the SEEK function. Once the highest frequency
is reached, the tuner continues SEEK mode at the
lowest frequency.
Frequency Scan (AM/FM only)
To scan, press and hold then release
tuner scans through tuned stations with a 5-second
preview before moving to the next station. To end
scanning, press
again.
Selecting a Bank
To select a bank, press and hold
or
for bank down.
Recalling a Memory Preset
Press
and
to scroll through a loop of all
the memory presets for the currently selected bank.
Only configured presets will be displayed.
Mute
Press the
button to mute/unmute the tuner
audio output.
or
or
. To seek
. Press
for
or
again con-
. The
for bank up
Advertisement
Table of Contents
