Two Display Panels, Two Sets Of Information - Bose Acoustic Wave CD3000 Owner's Manual

Figure 7
Inserting a disc into the CD
changer
Figure 8
Console displays (a) and
LEDs (b) indicating a CD on
the changer is playing
Using Your Acoustic Wave
Note: To keep track of the order of CDs in the slots, you may find it useful to keep the CD
cases stacked in the same order near the multi-disc changer.
To hear the CD you have just inserted, press the Play/Pause button on the console.
To remove a CD from a changer slot, press the button to the right of the LED for that slot.
Allow a few seconds for the mechanism to respond.

Two display panels, two sets of information

When the two units first turn on, displays on both consoles light up (Figure 8a). The Acoustic
Wave ® music system displays AUX to show that the CD changer or one of the components
connected to it is selected. It also shows the volume setting. The Acoustic Wave
changer display indicates what is playing on the changer. LEDs next to the CD slots on the
front of the changer light up as CDs are installed (Figure 8b).
Acoustic Wave ®
(a)
CD Play/Pause Stop Skip/Scan CD Mode
Acoustic Wave ® multi-disc changer display
Disc selected
DISC
AUX 1 AUX 2
Play/Pause Stop
Track playing
(b)
®
Acoustic Wave multi-disc changer front panel
What else the displays tell you
The display on the Acoustic Wave
selected. It also displays the number – 1 to 100 – of the volume setting. When the single CD
player is in use, it shows the track number and the elapsed playing time.
When the multi-disc changer is playing, its display shows which disc and track are playing
and the elapsed time.
TM
LED indicators
music system display
AUX VOLUME
Presets
1 2 3 4 5
FM AM
Volume Seek/Tune
Acoustic Wave Music System
AUX On/Off
TRACK
CHANGER
ON/OFF
Next Disc CD Mode
Elapsed time
Eject
1
2
3
4
5
® music system shows when one of its sound sources is
®
Multi-Disc Changer
Green light indicates
the slot is in use
after the CD is inserted
®
multi-disc
AUX indicator
CD play
CD indicator LED
9