Adding External Components; Connecting Other Sound Sources; Choose The Component(S) You Want To Connect - Bose Acoustic Wave CD3000 Owner's Manual

Connecting other sound sources

Figure 10
Connecting additional
components
This new changer provides a hub for other component connections.
CAUTION: Before connecting additional components, and to protect your components from
damage, be sure to unplug the multi-disc changer from the AC (mains) wall outlet if it is
plugged in.

Choose the component(s) you want to connect

Additional RCA input jacks allow you to connect other audio or video components to the
multi-disc changer. This gives you the advantage of hearing Acoustic Wave
sound from a range of sources. They can include a TV, VCR, cassette player, or DVD player,
for example.
Note: To connect an Acoustic Wave
®
Acoustic Wave music system. The multi-disc changer is not designed for use with a
microphone.
Steps for adding other components:
Use the RCA cable supplied with the component.
1. Insert both connectors at one end of that cable into AUDIO OUT jacks on the rear of the
component (Figure 10).
2. Insert both connectors at the other end of the cable into one pair of AUX jacks on the
multi-disc changer.
CAUTION: Be sure to match the red plug to the red jack.
Repeat steps 1 and 2 for any other components you want to connect.
Using External Components
® microphone, use the MIC jack on the rear of the
TM
L
R
®
music system
Auxiliary component
13