Bernina Artista 640 User Manual page 28

28 Displays on Screen
External Function Buttons
Altering Needle Position
• left button = needle to the left
• right button = needle to the right
• keep button pressed to quickly change
needle positions
• total of 11 needle positions: 5 left, 5 right
and 1 center
Needle Up/Down
• basic setting needle stop up
• touch the symbol briefly:
• the needle is raised or lowered (as
when tapping on the foot control
with your heel)
• touch the symbol longer:
• the needle is lowered
• the arrow on the screen points down
• the sewing computer stops with the
needle down
• touch the symbol again (also longer):
• the needle is raised
• the arrow on the screen points up
• the sewing computer stops with the
needle up
Pattern End
• press the Pattern End button
• a stop symbol in the right part of the
screen indicates that the function was
activated
• sewing computer stops at the end of the
active single pattern or the active pattern of
a combination
Quick Reverse Button on Head Frame
• press the Quick Reverse button on head
frame
• secure the seam beginning and end: sews
in reverse as long as button is depressed
• used to program buttonhole length
• used to program darning length
• used to designate end of stitching in
straight stitch Securing stitch No. 5
• securing with Quilters Securing Program
No. 324
Start-Stop Button
• starts and stops the sewing computer when
operating it without foot control
• starts and stops the sewing/ embroidery
computer in the embroidery mode with
attached embroidery module
• starts and stops the BSR function (optional)
when BSR foot is attached and plugged in
Slide Speed Control
• the motor speed can be freely adjusted
with the slide
Automatic Thread Cutter
• press external button
• upper and bobbin thread are cut
automatically