Bernina Artista 640 User Manual page 134

134 Embroidery
Convert Stitches (Split Stitch)
The embroidery motifs are filled with long or
straight stitches.
Long stitch:
• alternates from one side to the other
Straight stitch (fill stitch):
• consecutive stitches at regular intervals
• Touch the «Convert Stitches» symbol
• Long Stitch is converted into straight
stitch, max. length 8mm
• Touch the «-» or «+» symbol
• Touch the «+» symbol or turn the Stitch
Width knob clockwise = the maximum
straight stitch length will be increased
• Touch the «-» symbol or turn the Stitch
Width knob counter clockwise = the
maximum straight stitch length will be
decreased
• Touch the «OK» symbol = the selected
straight stitch length will be saved and the
Edit 1 screen will appear
• Touch the «Reset» symbol = the basic
state (8mm) will be activated
• to change the stitches back to long
stitches, touch the «Convert Stitches»
symbol again (field is inactive, grey)
Note:
In order to make a change,
the original design must be
selected.