Important Safety Instructions - Bernina Activa 210 User Manual

2 Safety instructions

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical machine, basic safety precautions should
always be followed, including the following.
Read all instructions before using this sewing computer.
When the sewing computer is not in use, it should be
disconnected from the electricity supply by removing the plug
from the outlet.
DANGER
To reduce the risk of electric shock:
1. A sewing computer should never be left unattended when
plugged in.
2. Always unplug the sewing computer from the electric outlet
immediately after using and before cleaning.
3. Always unplug before replacing light bulb. Replace the bulb
with the same type rated 12 volts / 5 watts.
WARNING
To reduce the risk of burns, fire, electric shock or injury
to persons:
1. Do not allow to be used as a toy. Close attention is necessary
when the sewing computer is used by or near children and
infirm persons. This sewing computer is not intended for use by
persons (including children) whit reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use
of the sewing computer by a person responsible for their safety.
Children should be supervised to ensure that they do not play
with the sewing computer.
2. Use this sewing computer only for its intended use as described
in this manual. Use only attachments recommended by the
manufacturer as contained in this manual.
3. Never operate this sewing computer if
it has a damaged cord or plug
•
it is not working properly
•
it has been dropped or damaged
•
it has fallen into water
•
Return the sewing computer to the nearest authorized BERNINA
dealer or service center for examination, repair, electrical or
mechanical adjustment.
4. Never operate the computer with any air openings blocked. Keep
ventilation openings of the sewing computer and foot control
free from accumulation of lint, dust and loose cloth.
5. Keep fingers away from all moving parts. Special care is required
around the sewing needle.
6. Always use the BERNINA original needle plate. The wrong plate
can cause the needle to break.
7. Do not use bent needles.
032622.50.04_0701_a210_EN