Brocade Communications Systems 8 Administrator's Manual page 103

98 Input Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
Performance Statistics - Priority: Low
0 Output Bytes
0 Bps 30s Avg, 0 Bps Lifetime Avg
0 Output Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
0 Input Bytes
0 Bps 30s Avg, 0 Bps Lifetime Avg
0 Input Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
Displaying FCIP tunnel information (7500 switch/FR4-18i blade)
You can use the portShow fcipTunnel command to view the performance statistics and monitor the
behavior of an online FCIP tunnel. To view detailed fcipTunnel statistics, you must specify either the
-perf or -params options. The command syntax is as follows.
portShow fciptunnel [Slot]/ge0|ge1 all|tunnel ID -perf -params
The following example shows the portCmd fcipTunnel with the -perf option to display performance
characteristics of tunnel 0.
switch:admin06> portshow fciptunnel 8/ge0 all —perf
Slot: 8 Port: ge0
-------------------------------------------
Fabric OS FCIP Administrator's Guide
53-1001766-01
Tunnel ID 0
Remote IP Addr 192.175.4.200
Local IP Addr 192.175.4.100
Remote WWN Not Configured
Local WWN 10:00:00:60:69:e2:09:be
Compression on
Fastwrite off
Committed Rate 300000 Kbps (0.300000 Gbps)
SACK on
Min Retransmit Time 100
Keepalive Timeout 10
Max Retransmissions 8
Status : Active
Connected Count: 1
Uptime 1 hour, 45 minutes, 3 seconds QoS shaper performance stats:
14808626616 Bytes
39615391 Bps 30s avg, 35008573 Bps lifetime avg
2013762456 compressed Bytes
33208083 Bps 30s avg, 4760667 Bps lifetime avg
7.35 compression ratio
FC control traffic TCP connection:
Local 192.175.4.100:4139, Remote 192.175.4.200:3225
Performance stats:
849 output packets
0 pkt/s 30s avg, 2 pkt/s lifetime avg
173404 output Bytes
39 Bps 30s avg, 409 Bps lifetime avg
0 packets lost (retransmits)
0.00% loss rate 30s avg
806 input packets
0 pkt/s 30s avg, 1 pkt/s lifetime avg
116736 input Bytes
35 Bps 30s avg, 275 Bps lifetime avg
Portshow command usage
4
89