Displaying A Single Circuit - Brocade Communications Systems 8 Administrator's Manual

Displaying a single circuit

The following example shows information for a single FCIP circuit on a 7800 switch.
switch:admin> portshow fcipcircuit 20 1
-------------------------------------------
Circuit ID: 20.1
Circuit Num: 1
Admin Status: Enabled
Oper Status: Up
Remote IP: 104.83.0.141
Local IP: 104.80.0.141
Metric: 0
Min Comm Rt: 150000
Max Comm Rt: 150000
SACK: On
Min Retrans Time: 100
Max Retransmits: 8
Keepalive Timeout: 5000
Path MTU Disc: 0
VLAN ID: 0
L2CoS: F: 0 H: 0 M: 0 L: 0
DSCP: F: 0 H: 0 M: 0 L: 0
Flags: 0x00000000
Displaying FCIP circuit performance (7800 switch and FX8-24 blade)
The following example shows FCIP circuit performance information for a 7800 switch.
switch:admin> portshow fcipcircuit 20 1 --perf
-------------------------------------------
Circuit ID: 20.1
Circuit Num: 1
Admin Status: Enabled
Oper Status: Up
Remote IP: 104.83.0.141
Local IP: 104.80.0.141
Metric: 0
Min Comm Rt: 150000
Max Comm Rt: 150000
SACK: On
Min Retrans Time: 100
Max Retransmits: 8
Keepalive Timeout: 5000
Path MTU Disc: 0
VLAN ID: 0
L2CoS: F: 0 H: 0 M: 0 L: 0
DSCP: F: 0 H: 0 M: 0 L: 0
Flags: 0x00000000
Flow Ctrl State: Off
Connected Count: 3
Circuit Duration: 7 hours, 40 minutes, 51 seconds
Performance Statistics: Overall Throughput
82900 Output Bytes
2 Bps 30s Avg, 2 Bps Lifetime Avg
754 Output Packets
Fabric OS FCIP Administrator's Guide
53-1001766-01
Portshow command usage
4
87