Table of Contents
Advertisement
■ To preview the entire specified masks
Select <PREVIEW> and press the SET button.
To return to the previous screen, press the SET button again.
(Example: 4 maskings)
MEMO:
MASK 1
2
When multiple masking positions
overlap, the masking setting with the
22
smaller MASK number will be preceded.
3333
22
111
3333
111
4
4
3
4
Note:
If masking is set, the camera name will not be displayed on the monitor
even if <TITLE> is "ON".
■ To cancel the masking setting
Change "ON" of the MASK number to "OFF" in the MASK selection
screen.
■ To change the previously specified masking setting
1
to 4.
Repeat steps from
Hiding Image Partially <OPTION> – <PRIVACY MASK>
6
Set <MENU> to "END" and press the SET button.
RCloses the settings screen and returns to the normal monitoring
screen.
The specified masks appear on the screen.
• If you want to return to the previous screen, select "BACK" and
press the SET button.
MEMO:
If <ALARM SIGN> is "ON" (see page 41), the alarm notification "A"
will be shown on all the masks during the time set in <DURATION>
(see page 40) when an alarm signal comes in.
If both of <ALARM SIGN> and <MOTION> (see page 38) are
"ON", the alarm notification "A" will be shown when the motion
sensor detects movement.
AAA
AAA
• If an alarm or movement is detected while an unmasked image
is being displayed, an alarm notification "A" appears in the top
left corner.
A
AA
AAAA
AA
AAAA
A
A
44
Advertisement
Table of Contents
