Sanyo VCC-P9574S - 1/4" CCD Pan-Focus PTZ Dome Camera Instruction Manual page 40

Setting Alarm <ALARM>
5
Select <uSENSITIVITY> and press the SET
button.
ALARM SETTING
ALARM IN
ALARM OUT
MOTION
uAREA
·uSENSITIVITY
·uSENSITIVITY
ZOOM
uZOOM TIME
DURATION
ALARM SIGN
RThe "SENSITIVITY" screen appears.
6
Select <MOVE> and specify a sensitivity level
(1 –10).
·<MOVE>
RThe greater the number, the lower the responsiveness to
movement becomes.
39
SET
1 y
NO
R
ON
SET y
SET y
OFF
5S
5S
OFF
SENSITIVITY
<MOVE>
· 5
<TIME>
1
TEST
SET y
PRESET
OFF
MENU BACK
7
Select <TIME> and specify a detection time of
duration (1 – 60).
RThe greater the number, the lower the detectability against
fast-moving subjects.
■ To confirm the sensitivity of the motion detection
Select <TEST> and press the SET button.
• Make sure that the motion-detected area is properly specified.
To finish the test, press the SET button.
8
Select <MENU> – "BACK" and press the SET
button.
RReturns to the "ALARM SETTING" screen.
• If you want to finish the settings screen, select "END" and press
the SET button.
MEMO: If <ZOOM> is enabled (see page 40), the image on the screen will
be zoomed up when the motion sensor detects movement. If
<ALARM SIGN> is "ON" (see page 41) when <PRIVACY MASK>
is "ON" (see page 42), the alarm notification "A" will be shown on
all the masks.