Registering Monitoring Positions <PRESET POSITION>
5
For showing the PRESET number during
monitoring, set <PRESET ID> to "ON".
PRESET POSITION
·PRESET ID
SKIP
·PRESET ID
ON
6
For skipping the preset position during
sequential panning, set <SKIP> to "ON".
PRESET POSITION
PRESET ID
·SKIP
·SKIP
ON
29
PRESET NO.1
ON
y
ON
OFF
PRESET NO.1
ON
y
ON
ON
■ To cancel a registered preset position
Change <PRESET POSITION> - "ON" to "OFF". The registered
position information can be restored by returning the setting to "ON".
Note:
"PRESET NO.1" cannot be turned OFF.
■ To change registered preset position information
1
to 6.
Repeat steps from
7
Set <MENU> to "END" and press the SET button.
RCloses the settings screen and returns to the normal monitoring
screen.
• If you want to return to the previous screen, select "BACK" and
press the SET button.