Bottom Menu; Pop Up Menu; Picture Control - Honeywell HJZTP User Manual

5.2.2 Bottom Menu

To enter the multiplexer bottom menu press the 'F2' ('▼' ), key twice to display:
Full
User Def1
Use the 'F1' ('▲' ), 'F2' ('▼' ), 'F3' ('◄' ) or 'F4' ('►' ) keys to select the required option,
then press 'F5' ('enter').

5.2.3 Pop Up Menu

Pressing the 'F1' ('▲' ), 'F2' ('▼' ), 'F3' ('◄' ) or 'F4' ('►' ) keys in live screen mode will
select a camera image (red border around image). Once the required image has been
selected, press the 'F5' ('enter') to display:
Use the 'F1' ('▲' ), 'F2' ('▼' ) keys to select the required option, then press 'F5' ('enter').
5.3

PICTURE CONTROL

The following table indicates the keys used for picture control:
Press the 'display' key to select the next display setting (in the cycle of '4x4', '3x3', '2x2'
and 'PIP' for a 16 way multiplexer, '3x3', '2x2' and 'PIP' for a 9 way multiplexer or '2x2'
and 'PIP' for a 4 way multiplexer).
Press and hold the 'Fn' key, then press the 'display' key to cycle through the other
cameras when displaying 2x2 and 3x3 displays.
Press the 'sequence' key to put the multiplexer output into a sequence (the sequence
depends on the current display mode and set-up). If the key is pressed again, the
sequence stops (displaying the current step in the sequence).
Press the 'freeze' key to freeze the current display. Press the key again to return to the
'live' picture(s).
Rev. 1.01
2x2 3x3
User Def2 User Def3
Live Cam Change...
Zoom...
Full
Priority On
Histogram On..
Panic Record On
Freeze On
Sequence
Utilities
Cancel
Key
display Display
sequence Sequence
freeze Freeze
play Toggle VCR input
search Digital Zoom
22
4x4
User Def4
Function
PIP
Cancel
900.0570
8-Sept-05