Section 2: Installation; Connections; Figure 1: Hjztp Rear Panel - Honeywell HJZTP User Manual

2.1 CONNECTIONS

All connections to and from the keyboard are made to the RJ type connectors located
on the rear panel of the unit.
Connector
KBD Master keyboard – To connect to a slave keyboard.
(RS485) Slave keyboard – To connect to a higher number slave keyboard.
VCL dome data input to master keyboard or last slave keyboard.
AUX Master keyboard – To connect either to a DVR or a multiplexer.
(RS485) slave keyboard – To connect either to the master keyboard, or a lower number
slave keyboard.
CONTROL RS485 telemetry output – for connection to PTZs (Honeywell domes) or RS485
(RS485) distribution box.
POWER Connection to 12VDC 300mA power supply (supplied).
Rev. 1.01
SECTION 2:
INSTALLATION

Figure 1: HJZTP Rear Panel

Function
3 900.0570
8-Sept-05