Table of Contents
Advertisement
ENJOYING SURROUND SOUND
Adjusting surround mode
parameters
You can configure the parameters for Dolby Pro Logic II
Music and DTS Neo:6 Music to fine-tune the surround
sound effect.
5BEAM
ST+3BEAM
1
STEREO
MY BEAM
4
MUSIC
MOVIE
7
OFF
+10
0
CH LEVEL
ENTER
TEST
1
Repeat steps 1 and 2 in "Enjoying 2-channel
sources in surround sound" on page 45 and
select PL II Music or Neo:6 Music.
2
Press
/
to select the parameter.
3
Press
/
to configure the parameter.
46
En
3BEAM
2
3
SURROUND
5
6
SPORTS
8
9
MENU
TV/AV
YSP
RETURN
ENTER
ENTER
When Dolby Pro Logic II Music is
selected
PANORAMA
Gives front left and right channel sound a wraparound
effect, distributed throughout the entire surround
sound field to give you an expansive feeling.
Choices: ON/OFF
Default setting: OFF
DIMENSION
Adjusts the difference in volume between front and
surround channels to the volume balance you desire.
Control range: –3 (toward the surround direction) to
+3 (toward the front direction)
Default setting: STD
CT WIDTH
Distributes the center channel sound to the left and
right. If set to 0, center channel sounds output only
from the center channel.
Control range: 0 to 7
Default setting: 3
When DTS Neo:6 Music is selected
C. IMAGE
Adjusts the center image from three channels (front
and center) to varying degrees.
Control range: 0.0 (wider) to 1.0 (toward the center)
Default setting: 0.3
Advertisement
Table of Contents
