Table of Contents
Advertisement
OSD SET (OSD settings)
Use to adjust the display position and the background
color of the OSD.
B)OSD
.
OSD SHIFT;;;;;;;;0
OSD
BACK
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
OSD SHIFT (OSD shift)
Use to adjust the vertical position of the OSD. Adjust
towards the – (minus) direction to raise the position of the
OSD, and adjust towards the + (plus) direction to lower it.
Choices: –5 to +5
Initial setting: 0
OSD BACK COLOR (OSD background color)
Use to select the background color of the OSD.
Choices: BLUE, GRAY
UNIT SET (Unit settings)
Use this to change the display unit of measurement.
Choices: METERS (Australia and U.K. models),
FEET (U.S.A. model)
C)UNIT SET
p
METERS
p
p
[ ]/[ ]:Select
[ENTER]:Return
• Select METERS to input distances in meters.
• Select FEET to input distances in feet.
Note
If you change this setting, the adjusted beam settings may change.
SET
COLOR;;;BLUE
p
p
FEET
MANUAL SETUP
71
En
Advertisement
Table of Contents
