Adjusting System Parameters; Using The System Parameters; Setting The Memory Protect - Yamaha YSP1100BL Owner's Manual

ADJUSTING SYSTEM PARAMETERS

This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to
adjust and customize the way this unit operates.

Using the system parameters

Follow the procedure below to enter the system
parameters.
+ +
INPUT VOLUME
CH LEVEL
TEST
1
Press STANDBY/ON on the front panel to
turn off the power of this unit.
STANDBY/ON
2
Press and hold INPUT on the front panel and
then press STANDBY/ON on the front panel
to turn on the power of this unit.
MEMORY PROTECT is shown in the front panel
display.
INPUT
MEMORY PROTECT
76
En
ADJUSTING SYSTEM PARAMETERS
STANDBY/ON
MENU
TV/AV
ENTER
YSP
RETURN
STANDBY/ON
VOL
3
Release INPUT on the front panel.
INPUT

Setting the MEMORY PROTECT

You can protect the settings you saved in the system
memory of this unit from being accidentally erased or
unwantedly changed.
1
Repeat steps 1 to 3 in "Using the system
parameters" on this page.
2
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
TV/AV
3
Confirm that MEMORY PROTECT is shown in
the front panel display and then press
ENTER.
MEMORY PROTECT
YSP
VOL
ENTER