JVC VN-A1U - Network Encoder Instructions Manual page 50

CAUTION
• When a large wave file (*.wav) is selected, the alarm operation may be
delayed depending on the PC specifications. Try to select a relatively
small wave file.
• In order to enable the Alarm 1, Alarm 2 and/or Relay Alarm setting it is
necessary to
1) Select "ON" in MotionDetection Alarm, Alarm 1, Alarm 2 and/or Relay
Alarm setting of V.NETWORKS setup tool (refer to page 31),
and
2) Check (✔) Alarm reg.
• When relay alarm has been set, the second alarm operations is not
performed.
Example: When the Relay Alarm occurs in the sequence of
Alarm 1 ➝ Alarm 2, alarms operate in the sequence of
Alarm 1 ➝ Relay Alarm and Alarm 2 does not operate at all.
50
Relay alarm
When relay alarm setting is performed using
the V.NETWORKS Setup Tool, this window
becomes active.
The program to be executed and the wave
file to be played back when a relay alarm is
generated can be set in advance.
(For these items, please see the previous
page.)
To enable the MotionDetection Alarm,
Alarm 1, Alarm 2 and/or Relay Alarm, it is
necessary to check (
✔
) Alarm Reg.