Changing Resolution And Inverting The Image - JVC VN-A1U - Network Encoder Instructions Manual

Changing resolution and inverting the image

The resolution can be selected
from 160 x 120, 320 x 240 or
640 x 480. Depending on the
installation, select Nor mal or
Upside Down.
ON-SCREEN RESOLUTION CHANGE
The resolution can also be changed on the screen with the following
procedure.
Display the motion detection information.
When checked: The area where motion is detected is displayed in colors. (Squares are
also displayed at the same time.)
If unchecked: The motion detection information is not displayed.
48
Select View from the menu.
Click the right button of the mouse on the
screen and select one of the following:
160 x 120, 320 x 240 or 640 x 480.
Clicking Properties displays the MAC
address, IP address, unit name, program
version, and storage destination.