Thermador KBUDT4255E Brochure & Specs page 6

TOP GRILLE PANEL – ROUTING REqUIREMENTS
Top and bottom edges of the top panel should be edge routed
1 / " (1.3 cm) and 3 / " (9.5 mm), respectively. Both ends should be
2 8
edge routed 7 / " (2.2 cm) as shown.
8
¹⁄�
"
(6.35 mm)
max.
Top
Grille
⁄�
"
(2.2 cm)
NOTE: When creating a panel with face detail, the offsets will be
hidden and must be accounted for in order to center the detail in
the top grille.
¹⁄�
"
(1.3 cm)
min.
Center face
detail between
offsets
³⁄�
"
(9.5 mm)
min.
¹⁄�
"
(6.35 mm)
max.
Top
Grille
⁄�
"
(2.2 cm)
¹⁄�
"
(6.35 mm) max.
¹⁄�
"
(6.35 mm) max.
1.800.735.4328 | THERMADOR.COM
SIDE-BY-SIDE
DOOR PANELS – ROUTING REqUIREMENTS
If an extended handle kit is used (EXTHANDSXS), then routing
the handle side of the panels is not required.
If the standard handle is used, route the entire handle side of
both panels 3 1 / " (8.25 cm) to allow for nger clearance. Then
4
route the other sides 1" (2.54 cm).
STANDARD HANDLE – TOP VIEW
¹⁄�
3 "
(8.25 cm)
min.
Door
¹⁄�
" (6.35 mm) max. Panel
2" (5 cm)
min.
DOOR PANEL - SIDE VIEW
¹⁄�
" (1.3 cm)
min.
CUSTOM PANELS
Hinge Side
Door
Panel
1"
(2.54 cm)
¹⁄�
"
(6.35 mm)
max.
265