Lan Tab; Lan Ip - Encore N150 User Manual

The LAN Tab is where LAN settings can be modified. If you are an entry level user, after
hooking up the necessary cables, try to access the internet from your computer. If you can
open a website with no problem, leave the settings as it is. If
changes were made, click the
configurations.
IP address: 192.168.0.1 is the router's LAN manufacturers default IP address (this will also
be the "Default Gateway" IP address of your LAN clients). It can be change based on your
LAN design and configurations. Typical designs don't need to change this IP address.
IP Subnet Mask:
segment. This is based on the IP address range used.
802.1d Spanning Tree: This is disabled by default. If 802.1d Spanning Tree function is
enabled, this router will use the spanning tree protocol to prevent network loops.

LAN IP

255.255.255.0 specifies the Subnet Mask address for your LAN
www.encore-usa.com

LAN Tab

button to save the changed
30