Advanced Tab - Encore N150 User Manual

Advanced Tab

On this tab you can set the advanced wireless settings. If you're in doubt what to enter or
use here, leave these settings as it is. This is for advance users only. Wrong parameters
can make the router un-operational.
Fragment Threshold:
Default value is 2346.Specifies the maximum size of a packet during the fragmentation of
data to be transmitted. If you set this value too low, it will result in a bad performance.
RTS Threshold:
Default value is 2347. When the packet size is smaller than the RTS threshold,
the wireless router will not use the RTS/CTS mechanism to send this packet.
Beacon Interval:
Default value is 100. This is the interval of time that this wireless router
broadcasts a beacon. A Beacon is used to synchronize the wireless network.
45
www.encore-usa.com