Table of Contents
Advertisement
3. A new Ethernet network interface will be showed up. By default, this will
show up as Ethernet Adaptor (en1) or Ethernet Adaptor (en2), etc.
*Actual strings depends on your operation system version, it may vary slightly depending on
the operating system.
Now that the installation of ENUET-3USB Ethernet adapter is complete. You
may now connect the adapter to a network device using an RJ-45 CAT-5 of
better Ethernet cable:
1. Connect an RJ-45 Ethernet cable to the Ethernet port on the adapter.
2. Connect the other end of the RJ-45 Ethernet cable to your network hub,
switch or router.
The Link LED should light up green to indicate a proper physical connection
between the adapter and the network. If the Link LED doesn't light up, verify the
cable connections on all the network devices.
ENUET-3USB User's Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
12
Advertisement
Table of Contents
