Table of Contents
Advertisement
Available languages
Available languages
Installation
Important
1.
Before you begin, make sure that the power to all the devices you will be connecting has
been turned off. You must unplug the power cords of any computers that can be powered
on from the keyboard. Otherwise, the KVM switch will receive power from the computer.
2.
To prevent damage to your equipment, make sure that all the devices you will be
connecting are properly grounded.
Installing your new ENKVM-USBB involves the following steps:
1.
Plug your keyboard, monitor, and mouse into their ports on the ENKVM-USBB. The
keyboard and mouse ports are labeled with an icon to distinguish them.
2.
Plug the USB and video connectors of the attached KVM cables into their respective
ports on the computers you are installing.
3.
Position the Easy Switch within reach on your desktop.
4.
Power on the power to the computers.
Note: The ENKVM-USBB's Power On by default will link to the first computer you turn
on.
Specifications
Computer Connections
Port Selection
Console
Ports
Connectors
KVM
Ports
LEDs
Selected
Cable
Computers
Length
Easy Switch
Video
Operating Temp.
Environment
Storage Temp.
Humidity
Housing
Physical
Weight
Properties
Dimensions (L x W x H)
Function
Keyboard or USB Hub
Mouse or USB Hub
Video
Keyboard/ Mouse
Video
ENKVM-USBB
Easy Switch
1 x USB Type A Female (Black)
1 x USB Type A Female (Black)
1 x HDB-15 Female (Blue)
4 x USB Type A Male (Black)
2 x HDB-15 Male (Blue)
2 (Green)
2048 x 1536; DDC2B
-20-60°C
0-80% RH, Non-condensing
8.24 x 7.71 x 2.46 cm
iii
2
1.2 m
1.8 m
0-50°C
Plastic
0.31 kg
Advertisement
Table of Contents
