Advertisement
• Supports DHCP Server / Client
• Supports Firewall protection, Virtual server mapping, Special application setting
• Supports UPnP
• AP Router to Repeater Mode. ENHWI-2!N3 can be a wireless repeater too. Just
switch mode from AP Router to Wireless Repeater.
HARDWARE SPECIFICATION
MCU (Chipset)
Memory
Flash
Interface Ports
LED Status
Power Requirements
Ralink RT3052, 384 MHz embedded RF/MAC/BBP
32 MB SDRAM
4 MB
WAN:
One 10/100 Fast Ethernet RJ-45
LAN:
Four 10/100 Fast Ethernet RJ-45
Reset Button
Power Input Port Jack
WPS™ (WiFi Protected Setup) Button
Power Status
WAN (Internet connection)
10/100Mbps LAN1 to LAN4
WLAN (Wireless Connection)
Power Supply: (Full Range)
200 to 240 VAC ± 10% (ETSI) Europe
100 to 120 VAC ± 10% (FCC) US
Device Input Power: 12 VDC / 1A
ENHWI-2AN3 Specification Sheet
16483 Old Valley Blvd. La Puente, CA 91744
Tel - (626) 336-4567 / Fax – (626) 336-2345
www.encore-usa.com
Advertisement
