Advertisement
Stations connection
Connect each station to the switch by twisted-pair cable. Plug one RJ-45
connector into a RJ-45 port of the switch, and plug the other RJ-45 connector
into the station's network adapter. Power on the switch and then system is ready.
For cable selection, refer to the following table.
Switches Connection
In making a switch interconnection, you could use any port to connect another
switch with straight or crossover cable. As all the ports support auto MDI / MDI-X
function, using a straight cable to make a switch-to-switch connection is allowed.
For cable selection, refer to the following table：
Network Speed
10Mbps
100Mbps
1000Mbps
Cable Type
Cat. 3, 4, 5 UTP/STP
Cat. 5 UTP/STP
Cat. 5 UTP/STP
Max. Length
100 meters
100 meters
100 meters
Advertisement
