Encore ENHGS-800 Datasheet

ENHGS-800
8 Port Giga Switch
The ENHGS-800 is a powerful, high-performance 10/100/1000 Mbps Fast
Ethernet and Gigabit switch, with all 8 ports capable of 10/100/1000Mbps auto-
negotiation operation (NWay), which means the switch could automatically
negotiate with the connected partners on the network speed and duplex mode.
Moreover, the 10/100/1000Mbps auto-sensing ability provides an easy way to
migrate 10Mbps to 100Mbps or 1000Mbps networks with no pain. Compared to
the shared 10Mbps, 100Mbps or 1000Mbps networks, the switch delivers a
dedicated 10/100/1000Mbps connection to every attached client with no
bandwidth congestion issue.
All Gigabit ports support auto-negotiation operation, auto MDI-X crossover
function and full-duplex mode. They are ideal for micro-segmenting large
networks into smaller, connected subnets for improved performance, enabling
the bandwidth demanding multimedia and imaging applications. The device also
provides the fat pipe to the servers or backbone connection for boosting the total
system performance.
Store-and-forward switching mode promises the low latency plus eliminates all
the network errors, including runt and CRC error packets. To work under full-
duplex mode, transmission and reception of the frames can occur simultaneously
without causing collisions as well as double the network bandwidth.
The switch is plug-n-play without any software to configure and also fully
compliant with all kinds of network protocols. Moreover, the rich diagnostic LED's
on the front-panel can provide the operating status of individual port and whole
system.