Advertisement
ENHGS-800X3 / ENHGS-500 are a powerful, high-performance Gigabit
Ethernet switch, with all ports capable of 10, 100 or 1000Mbps
auto-negotiation operation (NWay), which means the switch could
automatically negotiate with the connected partners on the network
speed and duplex mode. It is ideal for micro-segmenting large networks
into smaller, connected subnets for improved performance, enabling
the bandwidth demanding multimedia and imaging applications.
Moreover, the 10/100/1000Mbps auto-sensing ability provides an easy
way to migrate 10/100Mbps to 1000Mbps network with no pain.
Compared to the shared 10Mbps or 100Mbps networks, the switch
delivers a dedicated 10/100/1000Mbps connection to every attached
client with no bandwidth congestion issue. This switch also supports
auto MDI / MDI-X function. Each port could be used to connect to
another switch or hub with no crossover RJ-45 cable.
Store-and-forward switching mode promises the low latency plus
eliminates all the network errors, including runt and CRC error packets.
To work under full-duplex mode, transmission and reception of the
frames can occur simultaneously without causing collisions as well as
double the network bandwidth.
ENHGS-800X3 / ENHGS-500 provide 12K/9K (5-port / 8-port) bytes
jumbo frames, which means the frames size is larger than normal 1.5K.
With the Jumbo frame function, you can get better network
performance, because the switch can send more data at the same
time.
ENHGS-800X3 / ENHGS-500 is plug-n-play without any software to
configure and also fully compliant with all kinds of network protocols.
Before you start to install the switch, check the following contents in this
package：
One ENHGS-800X3 or ENHGS-500
One power adapter
User's manual
3
Advertisement
