Table of Contents
Advertisement
Operation with several handsets
The Ascom Eurit 133 allows you to operate
up to 6 handsets on one base station. You
can make two internal calls between two
handsets and at the same time one
subscriber can also make an outside call.
Each additional handset must be registered
with the base station and obtain an internal
subscriber number. Each internal subscriber
number (1– 6) can only be allocated once.
It is indicated on the handset display when
the handset is switched to On.
Note:
If during operation with several handsets
one of the handsets has already seized the
outside line, the busy tone is heard. You
can still make internal calls. Your handset
can be registered with a maximum of 4
base stations.
Preparing the base station for
registration
i
Press the internal key on the base
station for five seconds.
The connection indicator on the base st
ation (red light) starts flashing.
The base station is now on standby for 60
seconds to enable you to register a handset.
Registering a handset
If the base station has been prepared, you
can register the handset to the base station.
BaseStat. setting
Log on
On base station
1.
Key in the base station PIN or
"0000" (default setting).
2.
Key in the new internal call number
(1–6) for the handset.
3.
Determine the designation for the
base station (A–D).
Press OK
4.
If registration was successful this is signalled
to you on the display.
Note:
If the internal call number is seized a se-
cond time, the handset first registered on
it is de-registered.
If the registration process fails, the letter
symbol on the base station continues to
flash.
31
Advertisement
Table of Contents
