Advertisement
9.3
Tri-amplified systems
H3
The first (lower) M3
crossover and the second (upper) M3
+
amplified H3
/H3H
+
See M3
configuration notes later.
An alternative approach for these more complex designs is to use the Martin Audio DX1 digital 2 input, 4
output controllers which come fully loaded with a many Martin Audio presets including settings suitable for
+
Blackline
combinations.
Further operational choices include a 4 input, 8 output DX2 digital controller or a choice of 4 input, 8 output
or 8 input, 8 output digital management processors called Engineer. The Engineer offers a flexible event
scheduler, automatic programme level and tonality control to compensate for variations in programme
sources and a unique psycho-acoustical BassCreator algorithm.
See Section 8 (earlier in this document) for further information.
+
+
+
, H3H
or H3T
bi-amplified system set-up with S218 (H3
+
front panel must be set to With Sub to provide an H3
+
+
+
/H3T
crossover.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
front panel must be set to Full-range operation for a bi-
+
shown)
+
+
+
/H3H
/H3T
-to-S218
+
Advertisement
