Download Print this page

Recommended Controllers - Martin Audio Blackline F10+ User Manual

Blackline+ series
Hide thumbs Also See for Blackline F10+:

Advertisement

8

Recommended controllers

+
+
Because the F8
, F10
acoustic design principles, they can be used without a controller as long as their AES and peak power
ratings are not exceeded and care is taken to avoid amplifier clipping.
For maximum performance, however, we recommend that Blackline
Martin Audio M3
Controllers must, of course, be used with the bi-amplified H3
+
amplified H3T
power subwoofer does not include a passive low-pass network.
+
8.1
M3
2 input, 4 output analogue system controller
+
The Martin Audio M3
2in-4out system controller provides optimised crossover, EQ and limiter functions for
+
bi-amplified Blackline
+
+
+
F8
+ S12
, F10
+ S15
+
The M3
system controller may also be used as a simple equaliser and limiter for fully passive full-range
+
Blackline
applications.
+
Please refer to the M3
8.2
DX1
2 input, 6 output digital loudspeaker management system
The DX1 is a powerful 2in-6out DSP based audio processing unit for live applications and fixed
installations.
The unit is configurable in 5 basic modes (2x2 way, 2x3 way, 4 way, 5 way and 6 way crossover). Each
input has adjustable gain and delay. Each output consists of a high and low pass filter, 5 bands of
parametric equalisaton, limiter, delay (adjustable in 2.6 µs steps), gain and polarity controls.
DX1 system controllers are supplied pre-loaded with a wide range of Martin Audio presets. Blackline+
presets are available as binary files from
Please refer to the DX1 user's guide for further information.
8.3
DX2
4 input, 8 output digital loudspeaker management system
The new 4in-8out DX2 embraces the very latest advances in technology to meet the ever increasing
demand and expectations placed on professional audio systems. Based on a completely new processing
platform, running at 96kHz, the DX2 sets a new standard in terms of performance, flexibility and ease of
use.
The DX2 is a comprehensive digital loudspeaker management system, capable of being easily configured
to meet the most demanding applications in both fixed installation and live touring environments.
DX2 system controllers are supplied pre-loaded for a variety of Martin Audio live sound products. Blackline+
+
+
+
, F12
, F15
, F215
, S12
+
, DX1, DX2 or Engineer system controllers.
. Controllers must also be used when adding the S218
configurations (H3 or H3H), or for main-plus-subwoofer configurations (for instance,
+
+
+
+
, F12
+ S18
or F15
configuration notes later in this user guide for further information.
www.martin-audio.com
All material © 2007. Martin Audio Ltd. Subject to change without notice.
+
+
+
, S15
and S18
are passive systems embodying correct
+
+
+ S218
).
for loading via a pc.
+
Series systems are used with
+
, and H3H
and the bi-amplified/tri-
+
to a system as this very high

Advertisement

loading