Advertisement
Blackline F10
Compact two-way passive system
technical specifications
TYPE
Compact, two-way passive
FREQUENCY RESPONSE (1)
65Hz-20kHz ± 3dB
LOW FREQUENCY LIMIT
56Hz (-10dB)
DRIVERS
1 x 10" (250mm)/2.5'' (63mm) voice coil LF driver
1 x 1'' (25mm) exit HF compression driver
RATED POWER (2)
300W AES, 1200W peak
RECOMMENDED
400-650W into 4 ohms
AMPLIFIER
SENSITIVITY (3)
96dB
MAXIMUM SPL (4)
119dB continuous, 125dB peak
IMPEDANCE
8 ohms nominal
DISPERSION (-6dB)
90˚H x 50˚V
CROSSOVER
2kHz passive
ENCLOSURE
23 litre (0.8 cu foot) vented,
multi-laminate birch ply
FINISH
Textured black paint
PROTECTIVE GRILLE
Black perforated steel
CONNECTORS
2 x Neutrik Speakon NL4
FITTINGS
10 x M8 threaded inserts, 1 x top hat fitting
4 x M8 inserts for HTKM20 wall bracket
DIMENSIONS
(W) 351mm x (H) 500mm x (D) 317mm
(W) 13.8ins x (H) 19.7ins x (D) 12.5ins
WEIGHT
17kg (37lbs)
accessories
HTKCT04
Pole
HTKCT05
8mm Shouldered Eye Bolt
HTKF10Y
Flying Yoke
HTKM20
Wall Bracket (supplied in pairs)
COVF10
Black Padded Cover
Notes
(1) Measured on-axis in half space at 2 metres, then referred to 1 metre.
(2) AES Standard ANSI S4.26-1984.
(3) Measured in half space conditions at 2 metres with 1 watt input, using band limited pink noise,
then referred to 1 metre.
(4) Measured in half space conditions at 2 metres using band limited pink noise, then referred to 1 metre.
Trade Descriptions Act
Due to Martin Audio's policy of continuing improvement, we reserve the right to alter these specifications without prior notice.
Martin Audio is committed to refining state of the art sound reinforcement, combining in-depth product and field applications
research with advanced manufacturing techniques. Every Martin Audio product is built to the highest manufacturing standards
and rigorously tested to ensure that it meets the performance criteria specified in the design.
5 of 5
architectural and engineering specifications
The loudspeaker system shall be of the two-way passive
type consisting of one 10" (250mm) direct radiating
reflex loaded low frequency transducer and one 1"
(25mm) exit HF compression driver mounted on a user
rotatable constant directivity horn in a multi-angled
enclosure. The enclosure shall be of a multi-laminate
birch ply construction with integral pole mount and
threaded inserts for wall and ceiling mounting. Low and
high frequency sections shall be integrated by an
internal 2kHz passive crossover network.
Performance of the loudspeaker system with its
electronic controller shall meet or exceed the following
criteria:
Frequency response measured 1 metre on axis shall be
65Hz-20kHz ±3dB.
High frequency dispersion at -6dB points shall be
90˚H x 50˚V.
Power handling shall be 300W AES, 1200W peak.
Rated impedance shall be 8 ohms.
Maximum SPL measured at 1 metre on axis shall be
119dB continuous, 125dB peak.
Dimensions (W) 351mm x (H) 500mm x (D) 317mm
(13.8ins x 19.7ins x 12.5ins).
Weight 17kg (37lbs).
The loudspeaker system shall be the Martin Audio F10.
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: info@martin-audio.com
All information is Copyright © 2003 Martin Audio Ltd.
www.martin-audio.com
Advertisement
