Introduction; Unpacking; Contents Of A 1-Pack - Martin Audio C516 User Manual

<
CONTENTS
Standards Applied
1
Thank you for purchasing a Martin Audio C516 ceiling loudspeaker. This is
a versatile flush-mount loudspeaker designed for high quality music and
speech reproduction in distributed sound systems. It has been styled to
present a discrete, high quality appearance which will blend unobtrusively
into commercial and architectural environments.
It features a 6.5" (160mm) 2-way drive unit utilising patented ICT™
(Inductively Coupled Transducer) technology. This size of driver has been
chosen to optimise the conflicting requirements of low frequency extension
and high frequency dispersion.
The C516 is available in the following electrical configurations:
C516
C516T
2
Each C516 is built to the highest standard and thoroughly tested before it
leaves the factory. After unpacking the loudspeaker, examine it carefully for
any signs of transit damage and inform your dealer if any such damage is
found. Check that the electrical configuration supplied (4 ohm, 70/100V
line) is the one you require. It is suggested that you retain the original
packaging so that the speakers can be repacked and returned if necessary.
Please note that Martin Audio and its distributors cannot accept
responsibility for damage to any returned product through the use of non-
approved packaging.
2.1
1 loudspeaker baffle
1 back-can (complete with steel strip spring)
1 support bracket + wing nut
>
PRINT
This equipment conforms to the requirements of the
EMC Directive 89/336/EEC, amended by 92/31/EEC
and 93/68/EEC and the requirements of the Low
Voltage Directive 73/23/EEC, amended by 93/68/EEC.
EMC Emission
Immunity
Electrical Safety

INTRODUCTION

4 ohm
100V line (Europe and Japan)/ 70V line (USA)

UNPACKING

Contents of A 1-pack

Martin Audio – C516 Ceiling Loudspeaker
EN55103-1:1996
EN55103-2:1996
EN60065:1993
2
GUIDES