Desa owner's operation and installation manual (vent-free) natural gas stove heater sl30nt (25 pages)
Summary of Contents for Desa CGESBM
Page 1
MODEL CGESBM ELECTRIC STOVE WITH MANUAL CONTROL SAFETY INFORMATION AND OPERATION MANUAL Read these instructions completely before operating electric stove. Failure to follow them could cause a heater malfunction resulting in serious injury and/or property damage. Save this manual for future reference.
United States. All components are UL or CSA safety certified. If you need assistance during installation, please con- tact your local dealer or the DESA Heating Products Technical Services Department at 1-866-672-6040. UNPACKING AND TESTING THE UNIT Carefully remove the unit from the box.
GROUNDING INSTRUCTIONS This stove is for use on 120 volts. The cord has a plug as shown in Figure 2. An adapter is available for connecting three-blade grounding-type plugs to two-slot receptacles. The green grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box.
Page 5
There are a total of 7 halogen light bulbs (type GX6.35 rated 120 volts, 35 watts) in your unit. • 2 bulbs provide illumination for the ember bed beneath the log set • 2 bulbs provide illumination for the flame generation assembly •...
Page 6
CLEANING AND MAINTENANCE Continued Replacing Flame Generation Bulbs 1. Remove the 6 screws from back of stove shown in Figure 7. Remove back plate. 2. Locate the flame generation cylindrical drum. It is constructed of two removable halves; ei- ther of which can be removed from the unit. 3.
TECHNICAL SERVICE You may have further questions about your elec- tric stove. If so, contact DESA Heating Productsʼ Technical Service Department at 1-866-672-6040. When calling please have your model and serial numbers of your heater ready. You can also visit DESA Heating Productsʼ techni- cal services web site at www.desatech.com.
We make no other warranty, expressed or implied. DESA Heating Products warrants this product to be free from defects in materials and components for one (1) year from the date of first purchase (excluding bulbs and fuses), provided that the product has been properly installed, operated and maintained in accordance with all applicable instructions.