CHICAGO 98614 Manual page 58

4) If the test has been initiated by the vehicle, a confirmation
message will be displayed on the screen.
Some vehicles do not allow scan tools to control vehicle
systems or components. If the vehicle under test does not
support the EVAP Leak Test, an advisory message is displayed
on the screen.
5) Wait a few seconds or press any key to return to Diagnostic
Menu.
Component Test
►Evap Leak Test
Working
Command Sent!
Press any key to con.
.............Component Test
The selected mode is
not supported
Press any key to con.
57
1/1
?