CHICAGO 98614 Manual page 50

This Drive Cycle - indicates status of monitors since the
B.
beginning of the current drive cycle.
An I/M Readiness Status result of "NO" does not necessarily
indicate that the vehicle being tested will fail the state I/M
inspection. For some states, one or more such monitors may be
allowed to be "Not Ready" to pass the emissions inspection.
"OK" -- Indicates that a particular monitor being checked has
completed its diagnostic testing.
"INC" -- Indicates that a particular monitor being checked has not
completed its diagnostic testing.
"N/A" -- The monitor is not supported on that vehicle.
1) Use UP/DOWN scroll button to select I/M Readiness from
Diagnostic Menu and press ENTER button.
2) Wait a few seconds while the scan tool validates the PID MAP.
3) If the vehicle supports both types of tests, then both types will be
shown on the screen for selection.
...........Diagnostic
Read Codes
Erase Codes
Live Data
View Freeze Frame
I/M Readiness
►
O2 Monitor Test
....................I/M Readiness......... ......
Reading PID...
- Please Wait -
49
Menu....... .....
5/11
?