CHICAGO 98614 Manual page 29

If there are no Diagnostic Trouble Codes present, the display
indicates "No (pending) codes are stored in the module!"
Wait a few seconds or press any key to return to Diagnostic
Menu.
3) View DTCs and their definitions on screen.
The control module number, sequence of the DTCs, total
number of codes detected and type of codes (Generic or
Manufacturer specific) will be observed on the upper right
hand corner of the display.
4) If more than one DTC is found, use UP/DOWN scroll button, as
necessary, until all the codes have been shown up.
If retrieved DTCs contain any manufacturer specific or
enhanced codes, a "Manufacturer specific codes are found!
Press any key to select vehicle make!" message comes up
prompting you to select vehicle manufacturer to view DTC
definitions. Use
manufacturer and then press ENTER button to confirm.
Trouble Codes
►Stored Codes
Pending Codes
$09
P0118
Engine Coolant Temperature
Sensor 1 Circuit High
UP/DOWN
28
1/2
?
1/5
Generic
scroll button to select