Mainframe To Attachment Frame Assembly - Alamo Industrial Versa Series Operator's Manual

ASSEMBLY

MAINFRAME TO ATTACHMENT FRAME ASSEMBLY

Place Mainframe on a level surface. Raise Mainframe with a forklift or hoist and attach the Jack stands. Raise
Jack stands until the Mainframe is raised to approximately 18". Align the Attachment Frame (3) lugs with
Mainframe, install the Pins (4) and retain with 1/2 x 1-3/4 bolts (5), flatwashers (6) and locknuts (7). Install the
Axle Mount Bars (8) and retain with Pins (9) and Cotter Pins (10).
NOTE: It will be necessary to lower tank assembly in order to install pin (4).
VERSA 03/09 Assembly Section 3-3
© 2009 Alamo Group Inc.