Connecting & Disconnecting Implement Safety Instructions & Practices - Alamo Industrial Versa Series Operator's Manual

Avoid contact with hot surfaces of the engine or muffler.
when servicing hot components. Contact with a hot surface or fluid can cause serious injury
from burns or scalding.
The rotating parts of this machine continue to rotate even after the Tractor has been turned
off. The operator should remain in his seat for 60 seconds after the brake has been set, the
PTO disengaged, the tractor turned off, and all evidence of rotation has ceased.
Do not put hands or feet under mower decks. Blade Contact can result
in serious injury or even death.
stopped and the decks are securely blocked up.
Do not put hands or feet under mower decks. Blade Contact can result
in serious injury or even death. Stay away until all motion has stopped
and the decks are securely blocked up.
Do not put hands or feet near the cutter bar. Blade contact can result
in serious injury. Stay away until all motion has stopped and the
mower is securely blocked up.
Do not operate the implement while wearing loose fitting clothing.
clothing with the rotating elements can result in serious injury or even death.
all rotating elements at all times.
Connecting & Disconnecting Implement Safety Instructions & Practices
Each Rear Wheel must have a minimum of 1500 pound contact with the
surface to prevent lateral instability and possible tip-over which could
result in serious bodily injury or even death. Widen the wheel tread and add weights if
needed. Refer to the mounting instructions or call Customer Service if you need
assistance with Couterweight Procedure.
VERSA 03/09
© 2009 Alamo Group Inc.
SAFETY
(SG-38)
"Wait a minute...Save a life!"
Stay away until all motion has
(SFL-2)
(SGM-09)
(SSM-1)
(SSP-03)
(SBM-11)
Safety Section 1-5
Use gloves and eye protection
(SBM-5)
Entanglement of the
Stay clear of